Testing machine series

This machine is used to determine the resistance of materials to cut growth during repeated flexing. It's especially applicable to shoes soles Use a cutting tool to pierce the specimen some holes at the maximum bending point. lnspect the hole size growth with a measuring with the specified times of 90°bending.This machine has power off memory recovery function.

This test is capable to assessing the waterproof ability of the shoe lining cover.specimen gripped through the pneumatic gripping device immersed into water and filed with air under certain pressure the air bubbles will indicate the failure as long as any leakages occur.

It simulate people's walking different parts beard force such as tensile or damage. It's areference to improve the quality.This machine has intelligent power off memory recovery function.

Test water permeability resistance of shoes vamp and shoe supper leather&inner material under 20° temperature and 65% humidity testing conditions.

This tester ls used to test the flexing for various leather and fabric material snip the Inside and outside of test specimen,twist and turn over and over again until a certain numbers observe the damage of the test materials.This machine is applied to test cloth shoes,bags and other thin leather materials;it has intelligent power off memory recovery function.

This machine can do shoes/leather hydrolysis resistance test and rubber material frost test.Test setting such as low temperature high temperature and normal temperature are all available.Fault indicator for all function such as over high temperature,low water level test over compressor overload.

This machine simulates the transport container environment exposed to solar radiation to test the degree of resistance to discoloration of the shoes, and to provide reference for chemical materials when making shoe materials.

Simulates the circumstances of sunshine radiation to test the resistance to discoloration of shoes materials /leather/PU/TPR sole/ texitle etc. ZD-HY-8006A standard use the ultraviolet(UV)ray. It's the major facility in shoes and chemical factories for quality control and inspection.

This machine simulates the transport container environment exposed to solar radiation to test the degree of resistance to discoloration of the shoe sand to provide reference for chemical materials when making shoe materials.

It's used to determine the resistance to flexibility of finished shoes.Clamp the forepart of the shoe being tested. Start the motor and allow its rotating plate to apply a force to the shoe during testing. The encoder which is coupled to the rotating shaft is used for detecting the rotating angle of the rotating plate.The screen will Indicate the angle value.

This machine is used for testing the insole foreparts and stiffener that are flexed or deformed in wear to measure its quality.During the test,the specimen is rotated through 180°(90°each side of vertical)back and forth under a certain load until it breaks.In the meantime flexing times will be displayed on each individual counter when sole broken.It has power off memory recovery function.

It is used for testing the peel and shear strength of touch fastness.Cut the specimen in 75mm*20mm and stick lt under a specified load. And utilize a appropriate tensile tester (option)to test its adhesive strength (AS)as well as its peeling adhesion (PA)This machine has power off memory recovery function.