SHOE MAKING MACHINERY

★This machine is used to test the abrasion strength of polyester sole or shoes sole.in the case of abrasion wheel rotation the test sample is generated by friction on a certain sand content sandpaper to check the abrasion performance ★Feature:High-performance.Good reproducibility. Easy to operate.

It's used to determine the abrasion characters of cloth paper paint, plywood.leather,tile. glass tubber etc.Having the specimen abraded by a pair of grinding wheels under the specified load, get the weight, of abrasion loss of it, which is the different weight of the specimen between before and after testing.

This machine is used to test the color fabric or fastness of dyeing textile leather material.The theory is: cover the friction hammer with dry or wet white cotton cloth.Check the dyeing color fastness after rubbing the test sample on the worktable with a certain heavy load and times.This machine has power off memory function.

This tester is used to examine the cracking degree for upper and light leather. Using the clamping ring and cap to clamp round specimen periphery and the steel ball to press against the center of the flesh side of the specimen with the speed of 12 mm/min，Whilst the prssure reaches 800N. the distension height is recorded as the cracking value.

This machine is used to determine the resistance of materials to cut growth during repeated flexing. It's especially applicable to shoes soles Use a cutting tool to pierce the specimen some holes at the maximum bending point. lnspect the hole size growth with a measuring with the specified times of 90°bending.This machine has power off memory recovery function.

This test is capable to assessing the waterproof ability of the shoe lining cover.specimen gripped through the pneumatic gripping device immersed into water and filed with air under certain pressure the air bubbles will indicate the failure as long as any leakages occur.

It simulate people's walking different parts beard force such as tensile or damage. It's areference to improve the quality.This machine has intelligent power off memory recovery function.

Test water permeability resistance of shoes vamp and shoe supper leather&inner material under 20° temperature and 65% humidity testing conditions.

This tester ls used to test the flexing for various leather and fabric material snip the Inside and outside of test specimen,twist and turn over and over again until a certain numbers observe the damage of the test materials.This machine is applied to test cloth shoes,bags and other thin leather materials;it has intelligent power off memory recovery function.

This machine can do shoes/leather hydrolysis resistance test and rubber material frost test.Test setting such as low temperature high temperature and normal temperature are all available.Fault indicator for all function such as over high temperature,low water level test over compressor overload.

This machine simulates the transport container environment exposed to solar radiation to test the degree of resistance to discoloration of the shoes, and to provide reference for chemical materials when making shoe materials.

Simulates the circumstances of sunshine radiation to test the resistance to discoloration of shoes materials /leather/PU/TPR sole/ texitle etc. ZD-HY-8006A standard use the ultraviolet(UV)ray. It's the major facility in shoes and chemical factories for quality control and inspection.